500BBL Frac Tank

Our Equipment

$500bbl_frac_tank$ Spec Sheet

The 500 bbl Corrugated Wall, Liquid Storage Tank come equipped with new running gear, 10 mil DFT chemical resistant liners.

Floor: 1/4” PL, V-Bottom with integral formed side channels
Floor Support: 10" channel longitudinal runners with 8" channel and formed 1/4” PL channel cross-members
Walls: 1/4” PL solid welded, corrugated steel, corrugations 15" on center
Roof: Flat top, 1/4” PL solid welded with channel supports outside
Front/Rear: 1/4” PL solid welded, corrugated steel, 10" radius at vertical outside corners
Drain/Fill: 4" floor drain at rear end, 3" fill pipe to roof at rear, 4" suction line connection at front, 4" mid high connection at front, 8" flanged front manifold connection with turn down to floor sump
Manway: 21" manway on front, side, (3) non-sealed hatches on roof
Pick Up: Standard 5th wheel king pin
Welds: All welds continuous except substructure cross-members
Axle: 25,000 lb. axle with air brakes, 11.00 x 22.5 bias tires on steel disc wheels
Access: Front stairway
Hydrotesting: Full capacity static test
Dimensions: 45’ long, 8’-6" wide, 10’ high; 500 barrel capacity
Tank pressure/ vacuum relief vent
Level gauging