Our Equipment
Dewatering Units
Dewatering Unit – Vacuum Box with Filter Basket
Spec Sheet
- FLOOR: 1/4” PL one piece
- CROSSMEMBER: 3 x 4.1 channel 12" on center
- WALLS/ROOF: 1/4” PL solid welded, inside liner hooks
- STRUCTURE: Tubing and formed channel supports rated to operated at 30" hg
- DOOR: 1/4” PL with tubing frame
- FRONT: 1/4” PL with push plates
- PICK UP: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember
- WHEELS: (4) 10” DIA x 9” long with grease fittings
- DOOR LATCH: (4) independent ratchet binders with chains, vertical second latch
- GASKETS: Extruded rubber seal with metal retainers
- WELDS:All welds continuous except sub structure crossmembers
- FINISH: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color coat
- HYDROTESTING: Full capacity static test
- DIMENSIONS: 22'-11" long (21'-8" inside), 94" wide (83" inside)
Dewatering Unit – Heavy Duty Open Top Container with Filter Basket
Spec Sheet
- FLOOR: 3/16” PL one piece
- CROSSMEMBER: 3 x 4.1 channel 16" on center
- WALLS: 3/16” PL solid welded with tubing top, inside liner hooks
- DOOR: 3/16” PL with tubing frame
- FRONT: 3/16” PL slant formed
- PICK UP: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember
- WHEELS: (4) 10” DIA x 9 long with grease fittings
- DOOR LATCH: (3) Independent ratchet binders with chains, vertical second latch
- GASKETS: Extruded rubber seal with metal retainers
- WELDS: All welds continuous except substructure crossmembers
- FINISH: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color coat
- HYDROTESTING: Full capacity static test
- DIMENSIONS: 22'-11" long (21'-8" inside), 99" wide (88" inside), see drawing for height